details:

Energy saving, environmental protection, green has become the topic of the contemporary owner's boom. Energy saving, environmental protection, green LED has also become the stage lighting industry elf.

With the development of the industry, more and more people use the LED stage lighting instead of the traditional stage lighting. The use of LED stage lighting should pay attention to the following questions:

1, LED stage lighting products in the process of production to take anti-static measures, such as: workbench to ground, workers with anti-static ring, with anti-static gloves, etc., if the conditions permit to wear anti-static clothing is also necessary. Or you can install anti-static ion fan, at the same time to ensure that the humidity of the workshop at about 65%, so as to avoid the air is too dry and produce static electricity, especially green LED lamp beads are easily damaged by static electricity. In addition, different quality grades of LED lamp beads antistatic capacity is not the same, quality, high grade LED lamp beads antistatic ability to be stronger.

2, some manufacturers in order to reduce the cost of products using "resistance capacity buck" approach to LED stage lighting products, which will directly affect the life of LED stage lighting products. A dedicated switching power supply (preferably a constant current source) should be used to power the LED product so that it does not affect the useful life of the product, although the product cost is relatively high.

3, the temperature increase will make LED internal resistance smaller. When the ambient temperature rises, the internal resistance of the LED light source will be reduced, if the use of regulated power supply will cause the LED operating current increases, when it exceeds the rated operating current, will affect the life of LED products, will seriously LED light source "burn out", so should choose the constant current source power supply, in order to guarantee the working current of LED is not influenced by outside temperature.

4, LED product sealing. LED stage lighting products often have to be used outdoors, the same face waterproof, moisture-proof seal, if not handled properly will directly affect the life of LED products. Some manufacturers that require higher product quality use traditional epoxy "watering" methods to seal LED products. This method is troublesome to operate and is not suitable for bulky LED products (such as LED guardrail lamps) , But also will result in an increase in product weight.